Poseidon 800 lit/min

SKU: Poseidon

Description

The system consists of two precipitation tanks supplied with water by a submersible pump. The clean water from the precipitation tanks runs over to the clean water tank and by a system of pumps is supplied to the factory (clean water tank and pumps are not supplied). The sludge is dehydrated in a filter press which is installed on a separate basement.

Under the picture you can take a look to its Technical Characteristics.

N.2
PRECIPITATION TANKS
 
Two precipitation tanks are combined in the main structure of the system
 
·         Total capacity
25.000
lit
 
·         Length
5,2
m
 
·         Width
2,1
m
 
·         Height
5,5
m
N.2
Automatic valve for the discharge of the sludge
Φ100
mm
N.2
Manual valve for the discharge of the sludge
Φ100
mm
N.1
SUBMERSIBLE PUMP
 
Supply
1300
lit/ min
 
Useful supply height
10
m
 
Motor power
7
HP
N.1
Level control for pump working
N.1
PREPARATION DILUTION TANK
 
Constructed by carbonous steel special treaded and painted with anti-erosion paint both side
 
Capacity
1000
Lit
N.1
DOSING PUMPS 
 
Supply
153
lit/h
 
Useful supply height
5
m
 
Motor power
0,37
KW
Ν.1
SLUDGE MIXER TANK
 
Constructed by carbonous steel special treaded and painted with anti-erosion paint both side
 
Capacity
700
Lit
N.1
Mixer motor
1
HP
N.1
Manual valve for the discharge of the sludge
N.1
Level control
N.1
FILTER PRESS FP 600/7 INT
 
Complete hydraulic unit
 
Dimension
0.6×0.6
m
 
Hydraulic pump
4
Kw
 
Sludge production per cycle
88
dm3
N.1
Sludge pump
 
Useful supply height
5
m
 
Motor power
11
Kw
N.1
Electrical Board
 
Full electrical board with PLC for the control of the complete system
 
Included
 
·   Cables for the connection of the parts of the systems
 
·   Additional installation parts
 
Not included power supply cables for the systems

 

Manufacturer

backToTop Skip to content