Titan 8000 lit/min

SKU: Titan

Description

The system consists of two precipitation tanks each one supplied with water by a different pump. The pumps are working together or one by one each time, depending on the water demand of the plant. The clean water from the precipitation tanks runs over to the clean water tank which supplies the factory. The sludge is dehydrated in a filter press which is installed on a separate basement.

Under the picture you can take a look to its Technical Characteristics.

N.2
PRECIPITATION TANK
 
Constructed by carbonous steel-foil, designed for the better resistance on infiltration.
 
·         Total capacity
240.000
lit
 
·         Diameter
4
m
 
·         Height
14
m
N.1
CLEAN WATER TANK
 
·         Capacity
 95.000
lit
 
·         Diameter
 3
m
 
·         Height
 14
m
N.2
Automatic valve for the discharge of the sludge
Φ150
mm
N.3
Manual valve for the discharge of the tanks
Φ150
mm
N.2
WATER PUMPS ALFA
 
Supply
4000
lit/ min
 
Useful supply height
21.5
m
 
Motor power
60
HP
N.2
Level control for pump working
N.1
PREPARATION DILUTION TANK
 
Constructed by carbonous steel special treaded and painted with anti-erosion paint both side
 
Capacity
2000
Lit
N.2
DOSING PUMPS
 
Supply
400
lit/h
 
Useful supply height
5
m
 
Motor power
0,37
KW
Ν.1
SLUDGE MIXER TANK
 
Constructed by carbonous steel special treaded and painted with anti-erosion paint both side
 
Capacity
6000
Lit
N.1
Mixer motor
4
HP
N.1
Manual valve for the discharge of the sludge
N.1
Level control
N.1
FILTER PRESS FP1000/17 INT
 
Complete hydraulic unit
 
Dimension
1×1
m
 
Hydraulic pump
7.5
Kw
 
Sludge production per cycle
583
dm3
N.1
SLUDGE PUMP ALFA
 
Useful supply height
6
m
 
Motor power
18
Kw
N.1
Electrical Board
 
Full electrical board with PLC for the control of the complete system
 
Included
 
·         Cables for the connection of the parts of the systems
 
·         Additional installation parts
 
Not included power supply cables for the systems

 

Manufacturer

backToTop Skip to content